Natural Rubber Processing

EXTRUDINE MACHINE

Product introduction

Twin screw extruder is one of the main equipments for the primary processing of natural rubber. It is mainly used for the re-crushing and cleaning of the plastic blocks after the initial crushing of the crusher. After the treated rubber material enters the pool for washing, it is transported to the crepe chip machine for dewatering.
 
The power transmission of the twin screw extruder is transmitted from the motor to the transition shaft, and then to the reducer through the coupling and gear drive to the box body is equipped with the opposite direction rotation of the left and right screw unequal pitch, to achieve the extrusion, kneading of the rubber material, when the rubber material extrusion to the discharge knife disc is cut by the scraper. Add water to the box during the processing of the adhesive to realize the cleaning of the adhesive.
XGuangdong Zhenghe Machinery Co.,Ltd

WeChat,Scan QR code

WeChat:13828211689

(Add friends via wechat)

  Open wechat

WeChat Copied!