Natural Rubber Processing

BREAKER

Product introduction

The rubber crusher is used in the primary processing of natural rubber to break and clean the mixed rubber and remove the sundries in the rubber. It is one of the main equipment for the production of no.20 standard rubber.
 
Rubber crusher is composed of body, knife shaft, moving knife, fixed knife, motor, reducer, hopper and so on.
 
Rubber pieces of rubber transmission is transition from motor to the shaft, then directly by the incoming transition shaft speed reducer drive the knife shaft rotation, on the knife shaft is equipped with the knife plate, and respectively before and after the body with a knife, when plastic piece from hopper loaded by the rotation of the knife dish will miscellaneous plastic piece broken, broken rubber after through the body of the inclined plate into the tank, so as to achieve the aim of crushing, washing.
XGuangdong Zhenghe Machinery Co.,Ltd

WeChat,Scan QR code

WeChat:13828211689

(Add friends via wechat)

  Open wechat

WeChat Copied!